|Place of Origin:
|Minimum Order Quantity:
|Packaging according to customer requirements.
|MoneyGram, T/T, L/C
|Scope Of Use:
|Country Of Origin:
|Fujian, China (mainland)
offset toilet connector,
offset wc pan connector
Toilet drain pipe fittings toilet shifter WC connection shifter 10cm shifter.
The role of the toilet shifter.
The toilet shifter is a device (pipe fitting) that can change the position of the water port under the ground when the water port under the ground and the water outlet under the toilet are not suitable.The toilet shifter can not only change the position before and after the bottom of the water, but also change the position of the water mouth.Such as toilet wall distance is 25 cm, if can't find this small wall is apart from the toilet, can be used shifter forward out of 5 cm, and next to the toilet is the head of the water, such as pillars in big package, implement too crowded or not fit, also use shifter regulation about location.
Toilet shift method
The toilet in the toilet wants to shift is a more troublesome matter, and the method that moves besides USES closestool to shift implement, still have mat high ground and reopens the hole two methods.A high ground moving toilet needs to be piped to your toilet where it needs to be moved, so that you have to pad the ground so that it can be buried.Reopening the hole to move the toilet is to change the front-row toilet to the back seat toilet, can be easily concealed good pipeline.
|Toilet 10cm shifter.
|Scope of use:
|The toilet shift
It is suitable for the shift connection between toilet seat and bathroom drain pipe, and the shift distance is 2 inches, which is about 5CM.It is made of raw material, and the rubber ring is made of raw rubber.The flexibility is very good, easy to connect with the toilet drain mouth, and the sealing is very high.
Equipped with advanced waterproof rubber ring, flexible and good, effectively prevent leakage of the toilet.Suitable for siphon and straight flush toilet.The inner diameter pipe is smooth and without burrs.The inside of the wall is natural drainage, no sharp bend, no blockage possible.
Closestool shifter: some call deviator, shifter that mainly used the toilet when installation, because the bathroom wall and outlet position fixed, choice of implement and the outlet of the drainage pipe mouth position is not corresponding to the case cannot be completed because of the use of pipe fittings.There are a variety of length of the toilet shifter, from 2 cm to 3 meters can be moved.
When installing, the shifter is more than 1cm-2cm above ground tile, but it should be noted that the internal thickness of each brand's toilet base is different.If there is no internal height data of the toilet seat when the shifter is installed, please do not exceed 1cm above the ground after the installation of the shifter, so as not to cause trouble for the subsequent toilet installation.If the shift tube is fitted properly.Then there is no need to buy the sealing ring when installing the siphon toilet, if it is not very sure, it is advisable to wear a full - covered flange ring.When installing a straight flush toilet with blowdown pipe, simply remove the sealing ring from the bottom of the blowdown pipe and insert it directly into the conveyor's waterproof rubber ring, 8cm-10cm.
Contact Person: vivian