|Place of Origin:
|Minimum Order Quantity:
|Packaging according to customer requirements.
|MoneyGram, T/T, L/C
|Up And Down
|Strong Fall Type
|The Toilet Accessories
offset soil pipe connector,
offset drain connector
PVC toilet seat is connected to the shift tube toilet seat toilet seat toilet seat toilet accessories drain pipe
What is a toilet shifter?
The toilet shifter is fixed with the position of the bathroom wall and the outlet, and the choice of the seat of the toilet and the outlet of the drain pipe is not corresponding to the pipe fitting that cannot be completed.The installation of the toilet shifter is also very simple.
What are the types of toilet shifters?
Toilet shifter can be divided into adjustable and non-adjustable two kinds: adjustable shifter is live, can adjust the distance of shift, the maximum adjustable dozen.The non-adjustable shifter is the opposite.
Is the toilet shifter working?
As a result of the toilet under drainage is straight type, is the best way to drainage, generally don't change the position of the toilet, see some netizens design change the position of the toilet, toilet drainage pipeline under transversely laid under ground, such a special risk, and shower laying pipes across the relationship of the basin that wash a face is not big, because in water, and arrange the toilet is not only the sewage, and solid, in case of congestion, so across the pipeline is very difficult to dredge.In addition, after the use of the toilet shifter, the ground correspondingly increased, the toilet also was raised.
|The toilet shift connector.
|The toilet is connected to the drain.
|Scope of application:
Attention to toilet shift.
Toilet shift can lead to awkward situation, the new toilet after shift is often not smooth, dirty things can not flow out, and from time to time send out stink.Home decoration industry generally does not move the position of the toilet, because the move is not good can appear smelly, blocked situation.
1. Toilet displacement within 10 cm.The several water pipe position of toilet, can not move not move!Generally change closestool position 10 centimeters or so, use special toilet shift implement.Because the location of the movement is not very large, it is not very likely to be blocked.If you want to move a little further away, you don't have a shifter to use, you can only retrofit the sewer.
2. Toilet displacement of over 10 cm.If you want to move a bit further, beyond dedicated shifter can use toilet, so at the same time of transformation pipeline must raise the toilet ground and add a trap, trap to prevent the reverse flow of gas.Since the diameter of the drain pipe is generally 110MM, the floor should be at least 120MM high, leaving some room for cement mortar and water pipe slope.
3, closestool shift in addition to consider the congestion, still have to pay attention to the sealing pipe especially the interfaces between different pipe position, to check whether there is leakage hole for many times, it is important to ensure that no leakage and sealing ring, glass glue, etc. The same can't be little.
The three common methods are summarized: one is to improve the floor;The second is to retrofit the original pipeline downstairs;Third, use electric toilet to make strong row;Four is to use side discharge closestool.
Contact Person: vivian