|Place of Origin:||CHINA XIAMEN|
|Minimum Order Quantity:||Can discuss|
|Packaging Details:||Packaging according to customer requirements.|
|Delivery Time:||15-30 days|
|Payment Terms:||MoneyGram, T/T, L/C|
|Usage:||Buried Pipe Installation||Specifications:||Optional|
|Material:||PVC||Processing Mode:||Assembly Production|
|Product Category:||Toilet Connector||Flushing Mode:||To Drain|
offset soil pipe connector,
offset drain connector
Flexible Locking Joint WC Offset Connector Implement Drain Pipe Connector
Sometimes we haven't measured the space of the bathroom to buy the toilet, and when we buy it, we find it too big or too small. We don't know what to do.Still have, because the design is unreasonable, cause closestool to put a position to compare unsightly.Another is personal preference and decoration needs.When confronted with these problems, we must first think that the toilet can be shifted?
First, let's give the answer.Can the toilet move?The answer is yes, it can be shifted.So what are the requirements and methods for shifting the toilet?
2. In principle, it is better not to shift the toilet seat.Of course, if there is no way to do a shift, the movement distance below 15cm can be shifted with a dedicated shifter.This general decorator can operate, only need a shifter to be able to handle.Disadvantages: short distance, and affect water drainage.
3. Then, if the shift is above 15CM, the shifter cannot be used, and only the whole toilet can be reconstructed.Not only to transform the water pipe, but also to the original position to block.This project is much bigger.
If it's a "back row" toilet (now it's usually in the bottom row).Such a displaced pipe can walk along the wall, and it is easier to handle concealed piping without the need for higher ground surface.But you need permission from downstairs residents.This won't be as easy to block as a toilet shift.However, after changing the position of the water pipe, it is necessary to make the water resistant again, and make sure that the water is closed and the water will not leak.It is also suitable for small changes.
5. "discharge type" shift method: toilet mat high ground displacement of the toilet, is the need to run pipe on the ground that you need to shift your toilet, then you have to higher ground, so that the pipeline buried.The method of laying high ground will bring inconvenience to our life.But make sure to re-water the water after changing the position.The closed water test also has to be done.
If it's a sink bathroom, you can change it as you wish.Lower sink toilet toilet change is more diversified.This is more convenient.
|Name:||The toilet connects the shifter.|
|Product category:||Toilet shifter|
|Usage:||On line type|
|Flushing mode:||Strong fall type|
|Flush key:||Go up and down.|
|Performance:||The toilet shift|
How to install the toilet shifter?
Normally, toilet walls and drainage tube distance is emissions, according to the standard size design due to implement variety style very much, combined with personalized decoration, and the outlet of the selected implement blowdown nozzle position does not correspond, shifter is required to complete the docking at this time.
Shifter is a fixed size, on the market at present no corresponding adjustment, once the top and bottom interface migration centre, blowdown from this scale in the future, due to poor drainage, with the extension of time scale, more product more severe, causing poor ZuGeng, in case of small obstacles will be blocked.
The toilet shifter is used when the pit is too short or too long.The general shift is not more than 10mm, and the floor tile should be adhered before installation. It is recommended not to use the shifter in very good condition, which will affect the flushing effect.
The shifter of the toilet is a device which can change the position of the water port under the ground when the water port under the ground and the water outlet at the bottom of the toilet are not suitable.The shifter can not only change the position before and after the bottom of the water, but also change the position of the water mouth.If can't find this small wall is apart from the toilet, can be used shifter forward out of 5 cm, and next to the toilet is the head of the water, such as pillars in big package, implement too crowded or not fit, also use shifter regulation about location.
The place that the shifter commonly sells sit implement in the past has, have adjustable and unadjustable two kinds, adjustable shifter is live, can adjust the distance of shift, the biggest can adjust a dozen.Implement the drainage is straight type, is the best way to drainage, generally don't change the position of the toilet, see some net friend changed the design of toilet implement position, drainage pipeline under transversely laid under ground, such a special risk, and shower laying pipes across the relationship of the basin that wash a face also is not big, because the line is water, arrange and implement is not only the sewage, and solid, in case of congestion, so that across the pipeline will be difficult to dredge.Shifter is also changed the implement straight-through type drainage, drainage will have impact on the toilet, shift the greater the distance, the more unfavorable to drainage unobstructed, so it's not a necessity, try not to use shifter, if must use, also try to shift of the minimum distance.
Install the toilet shifter to have the slope requirement, the general shift distance is larger, the slope is also larger.So before install shifter to stick floor tile, plane down to the ground or mat high ground, some shifter ground mat, can be transversely drainage place is narrow (generally the channel is flat).But if you move only 5 centimeters, the relationship is small, the bottom of the water is 10 centimeters, which is equal to half of the opening.
Toilet shift note:
Toilet shift is relatively troublesome, besides use shifter, still have mat high ground and reopen hole two methods.
But the high ground will cause inconvenience.There are no technical problems with the re-opening of the floor, but you need to get permission downstairs, or downstairs.
1. If you only change the pit distance, you can use the "shifter" to change the distance of 5cm.
2. High ground shift toilet.That's where you need to move the pipe to your toilet where it needs to be shifted, so you have to raise the ground so you can bury it.
Switch to the "back row" toilet (now it's usually in the bottom row).Such a displaced pipe can walk along the wall, and it is easier to deal with the covert of the pipe without the need of high elevation.
Contact Person: vivian