|Place of Origin:||CHINA XIAMEN|
|Minimum Order Quantity:||Can discuss|
|Packaging Details:||Packaging according to customer requirements.|
|Delivery Time:||15-30 days|
|Payment Terms:||MoneyGram, T/T, L/C|
|Power:||Hydraulic||Temperature Of Media:||Normal Temperature|
|Float Material:||PE||Working Temperature:||0℃-- 70℃|
|Installation Angle:||Vertical||Surface Treatment:||No|
Toilet fittings toilet water tank fittings blue water tank inlet valve upper water
Closestool is the closestool that we live in the household, can say every family can see closestool figure.Toilet drain valve everybody should know.The drain valve is very important for the whole toilet to be used properly, so it is necessary to master the installation method of toilet drain valve.Next, how to install the toilet drain valve?What is the troubleshooting method of toilet drain valve?
How to install toilet drain valve?
1. Preparation: measure the toilet seat and installation position to ensure the product size is correct and convenient to use.Install the triangulation valve, and check whether the ground water is clean and free of foreign material, mainly for the convenience of the installation of the toilet, and the smooth installation after installation.
2. Line positioning: put the toilet seat in the position to be installed, and align the water outlet.Underline the edge of the toilet with a pencil, and specify the specific position after it is installed so that it can be fixed with silica gel. Be sure to align the toilet seat with the lower water port.
3, installation flange: need to check the quality of the flange before installation, ensure that under the condition of no damage to install, installation time to place it drains, and then with silica gel, and ensure that won't produce the problem such as leakage, flange installation is an important link in the entire process, if the flange is not installed, then implement in the process of using water is likely to happen.
4, completes the fixed: implement pencil crossed place daub on silica gel, this will ensure that tied to the ground and implement, in the process of the coated silica gel must be silicone coating evenly, and surface flat as far as possible, so as to assure the silica gel after dry appearance give a person a kind of neat feeling.
5. Put forward position: put the toilet seat back in place, and after fixing the position, clean up the silica gel that spilled on the bottom.Repair unfitted areas in case of future leakage.
6. Connect water inlet: after the above work is finished, connect the inlet pipe and connect the water inlet hose of the toilet seat.To make sure that the connection points are firm, the tube is free of pressure, and the pipe is not wound to ensure that there will be no seepage, leakage or running water in the future.
After installation of 7, water testing: implement to align water experiment was carried out, appropriate adjustment tank water level of high and low, through sound, check whether unobstructed, normal water flow velocity, and of course if everything after commissioning normal, suggest not to use the toilet right now, as far as possible to the silica gel dry after use, generally need to use over 24 h after installation.
|Name:||Toilet tank float valve.|
|Product category:||Cistern fittings|
|Processing mode:||LOGO branded|
|Installation:||The toilet water tank|
|Product features:||Quiet water|
|Standard or Nonstandard:||Standard|
What is the troubleshooting method of toilet drain valve?
1. Failure: water inlet valve is slow (1)
Reason: the water inlet valve seals the water.
Elimination method: first of all, the decorative cover, the arm, the cover of the valve is removed, then the power arm seal, the cover of the sealing water plate clean.After the valve cover, arm, decorative cover back in place can continue to be used.
2. Failure: water inlet valve is slow in water (2)
Reason: there is clutter in the filter.
Troubleshooting: loosen the lock nut and wash the nut in clean water.
3. Failure: water inlet valve shall not be flooded.
Reason: the buoy is covered with debris or other parts.
Troubleshooting: clean the buoy with clean water and check if other parts are covered.
4. Failure: the drain valve is leaking.
Reason: the sealing water film has the sand to adhere to and adjust the cup to have the sundry to resist.
Troubleshooting: wash the water with clean water and check whether there is sundries in the working of the sealing water plate and the adjustment cup.
5. Failure: the drain valve button can't be returned after one work.
Reason: the spring is affected by the seawater or the water quality that does not meet the sanitation requirement or the push rod of the button and the key force is not even.
Elimination method: do not use unqualified water quality and rotate the drain valve of button, can be 360 ° rotation direction of the push rod.